IDmarktech

Text Box: TECHNICAL FEATURES ID MARK is the easiest method for making customized identification products Fast With ID MARK, you can produce a finished plate in less than 5 minutes. Sharp ID MARK offers exceptional resolution capability.
You can create ultra fine detail photos as well as detailed diagrams and charts with fine lines. Safe With ID MARK, there are no processing chemicals. Convenient ID MARK sheets come in a variety of sizes, thicknesses and colours, all self-adhesive for easy mounting and finishing. Economical From prototypes and one-of-a-kind projects to short-run production requirements, all types of identification products can be produced quickly and economically, without costly set-up and production charges. ID-MARK ® aluminium sheets and polyester overlam films were subjected to the following controlled and industry accepted test conditions. Results for each test are as indicated. These results are typical values; not to be used for specification use.

Stunning Quality! Lasts for a lifetime

ID-Mark

PROCESS

ID MARK CHARACTERISTICS

TECHNICAL FEATURES

A PHOTO QAULITY FINISHED SIGN IN 5 MINUTES

Chemical Resistance	Four hour immersion at room temperature in:
	Water……………………….	No effect
	Alcohol (isopropyl)	No effect w/ overlam, Slight fading w/out
	Oil	No effect
	Hydrocarbons	No effect
	Base (pH = 10)	No effect
	Acidic (pH = 4)	No effect
Abrasion resistance	Taber Abraser CS-17 Wheels with 1000 gms load
	Without overlam	Image dulls after 73 cycles
	With overlam	Image dulls after 700 cycles
Salt Spray	5% concentration at 95degreeF for 72 hrs	Aucun effect
	95% relative Humidity at 90degreeF for 72hrs	No effect
Temperature	-20 o 250degreeF/ -28 o 121degreeC	No effect
Long term exposure	5 year exposure at 90 degree
	Whetherometer simulated	Black : no effect
		Red, Blue, Green(w/ overlam) : no effect
Shelf life	Plates should be stored in clean, lower humidity area Temperature should be 80degreeF or so	1 year