|
Stunning Quality! Lasts for a lifetime |
|
Alumamark® |
|
Abrasion resistance |
Taber abraser with CS17 wheel – 1 Kg load : 7 000 cycles |
Slight dulling of surface |
|
Temperature resistance |
Standard image at 500° F |
Slight dulling |
|
Salt spray |
5 % at 95°F for 700 hours |
No corrosion |
|
PROCESS |
|
ALUMAMARK CHARACTERISTICS |
|
TECHNICAL FEATURES |
|
Hydrocarbon fluid |
1hour immersion |
No effect |
|
Turbine & jet engine fuel |
1hour immersion |
No effect |
|
JP- 4 Fuel |
72 hour immersion |
No effect |
|
Kerosene |
12 hour immersion |
No effect |
|
Skydrol (hydraulic fluid) |
24 hour immersion at room temperature and boiling point |
No effect |
|
Methyl Ethyl Ketone (MEK) |
24 hour immersion |
No effect |
|
Ethyl acetate |
24 hour immersion |
No effect |
|
Xylol |
72 hour immersion |
No effect |
|
Heptane |
72 hour immersion |
No effect |
|
Ethyl Alcool |
72 hour immersion |
No effect |
|
Ferric Chloride |
10 % solution , 16 hour immersion |
No effect |
|
Ammonium Hydroxide |
10 % solution , 16 hour immersion |
Slight dulling |
|
Soap solution |
16 hour immersion |
No effect |
|
MIL-C-25179 AIN in heptane |
25 % solution , 1 min immersion (cleaning solution) |
No effect |
|
Sulfuric acid |
10 % solution , 24 hour immersion |
No effect |
|
Phosphoric acid |
1 % solution , 12 hour immersion |
No effect |
|
Nitric acid |
3 % solution , 72 hour immersion |
No effect |
|
TSP (trisodium phosphate) |
1 % solution , 40 hour immersion |
No effect |